plastics – Chroma Color Corporation

CALL NOW : 815-385-8100

Processes

Injection Molding

Injection molding is a manufacturing process to produce parts by injecting plastic material into a mold

Injection Molding

Injection molding is a manufacturing process to produce parts by injecting plastic material into a mold

Blow Molding

Blow molding forms hollow plastic parts. There are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding.

Blow Molding

Blow molding forms hollow plastic parts. There are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding.

Compression Injection

Compression Injection utilizes injection machine and compression attachment that applies clamp tonnage to fill the cavity.

Compression Injection

Compression Injection utilizes injection machine and compression attachment that applies clamp tonnage to fill the cavity.

Extrusion

Extrusion (Sheet, Profile, Pipe, Monofilament, etc.) process melts pellets into a liquid that forced through a die to form tubes, profiles, or sheet.

Extrusion

Extrusion (Sheet, Profile, Pipe, Monofilament, etc.) process melts pellets into a liquid that forced through a die to form tubes, profiles, or sheet.

Extrusion Coating

Extrusion Coating (Wire & Cable, Textile Coating) coats a molten web of synthetic resin onto a substrate material.

Extrusion Coating

Extrusion Coating (Wire & Cable, Textile Coating) coats a molten web of synthetic resin onto a substrate material.

Film (Cast)

Film (Cast) In a film-casting process, a web of thin film is extruded onto a chilled, highly polished, turning roll.

Film (Cast)

Film (Cast) In a film-casting process, a web of thin film is extruded onto a chilled, highly polished, turning roll.

Rotational Molding

Rotational Molding uses a heated hollow mold which is filled with a charge or shot weight of material. Then the mold is slowly rotated to cause the softened material to disperse and stick to the walls to form the part.

Rotational Molding

Rotational Molding uses a heated hollow mold which is filled with a charge or shot weight of material. Then the mold is slowly rotated to cause the softened material to disperse and stick to the walls to form the part.

Plastic Compounding

Plastic Compounding consists of develop formulations for processes by mixing and/or blending polymers and additive, including color into a molten state to achieve the desired characteristics

Plastic Compounding

Plastic Compounding consists of develop formulations for processes by mixing and/or blending polymers and additive, including color into a molten state to achieve the desired characteristics

Other Specialty Niches

Other Specialty Niches

Markets

Products

Processes